Filter
Top Products
5. Next, type the same Passkey number on
the Stowaway keyboard. When finished,
press the <Enter> key on your keyboard.
6. If the Passkey is entered successfully on
both devices, the message BT Keyboard
Connected will appear. If the keyboard
does not show up as connected:
a. Press the Discoverable button again.
b. Or, power cycle the keyboard (close
and reopen), then press <Ctrl>
<Left Fn> <Right Fn>.
c. Or, check that the Red LED on the
keyboard is not lit after a power
cycle, indicating a dead battery.
7. If the passkey is not entered correctly, the
connection will fail. In this case you will
need to repeat steps 3-5 from above.
NOTE: Please, make sure that the passkey
is entered on your mobile device first, tap
Done (twice), and then follow with the
passkey on the keyboard. When finished,
press the <Enter> key on the keyboard.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 6