Filter
Top Products
1-10
Microstepping MForce PowerDrive Manual Revision R040507
P3 Connector - DC Power, 2-Pin Locking Wire Crimp
Pin Assignment - P3 Power
2-Pin Locking
Wire Crimp
Function Description
Pin 1 +V +12 to +75 VDC, 4 Amps Maximum per MDrive34Plus.
Pin 2 GND Power Supply Return.
Table 1.2.8: P3 Connector
P3
12 10 8 6 4 2
11 9 7 5 3 1
12
Figure 1.2.3: P3 — 2-Pin Locking Wire Crimp Pin Configuration
Pin Assignment - P4 Motor
5-Pin Locking
Wire Crimp
Function Description
Pin 1 Phase A Phase A Motor Output
Pin 2 Phase A Phase A Motor Return
Pin 3 Phase B Phase B Motor Output
Pin 4 Phase B Phase B Motor Return
Recommended
Cable
PD04-MF34-FL3
Table 1.2.9: P4 Connecter
P4 Connector - Motor
P4
12 10 8 6 4 2
11 9 7 5 3 1
1
1
2
2
3
4
Figure 1.2.4: P4 — 4-Pin Locking Wire Crimp Pin Configuration
Recommended Connector Shell and Pins
Shell: Molex P/N 39-01-2045
Pins: 4 x Molex P/N 44476-3112
Wire: 16 AWG Shielded Twisted Pair
Recommended Connector Shell and Pins
Shell: Molex P/N 510-67-0200
Pins: 2 x Molex P/N 502-17-9101
Wire: 18 AWG Shielded Twisted Pair
NEED A CABLE?
The following cables
and converters are
available to interface
with P3:
2-Pin Locking Wire Crimp
PD02-3400-FL3
WARNING! Do not
plug or unplug DC
Power with power
applied.
NEED A CABLE?
The following cables
and converters are
available to interface
with P4:
4-Pin Locking Wire Crimp
PD04-MF34-FL3