Intelligent Motion Systems om-192-s Printer User Manual


 
7
Regular ERC-09- (PforpurpleorBforblack)
Long Life ERC-22- (PforpurpleorBforblack)
©
3-6 Loading Paper
Use a paper roll that meets the specifications. Do not use paper rolls that are
glued to the core. Make sure data is not being transmitted to the printer while
loading paper.
1. Cut the leading edge of the paper roll straight at a right angle, as show n
above.
2. Remove the old paper roll, if any, and press the FEED button until any
excess paper left in the mechanism is out. Do not pull the paper out of
the printer mechanism paper inlet.
3. Mount the paper roll on the paper roll holder by gently bending the plastic
tab, on the right, and insert the roll so that the holes in the core align with
the axes of the paper roll holder. Make sure that the two holders are
completely inside the core so that the paper roll can move freely without
much friction, i.e. the core inside diameter is larger than the paper roll
holder’s outside diameter.
`
`````
PUSH
ribbon
change