Filter
Top Products
3. PRINTER FUNCTIONS
KPM210/216
143-
HnLn$CSEHnLn$CSE
HnLn$CSE
HnLn$CSEHnLn$CSE
[Name] Set absolute print position
[Format] ASCII ESC $ nL nH
Hex 1B 24 nL nH
Decimal 27 36 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Sets the distance from the beginning of the line to the posi-
tion at which subsequent characters are to be printed.
The distance from the beginning of the line to the print posi-
tion is [(nL + nH × 256) × (vertical or horizontal motion unit)]
inches.
[Notes] • Settings outside the specified printable area are ignored.
• The horizontal and vertical motion unit are specified by
GS P or GS $D0.
• GS P or GS $D0 can change the horizontal (and vertical)
motion unit. However, the value cannot be less than the mini-
mum horizontal movement amount.
• In standard mode, the horizontal motion unit (x) is used.
• If the setting is outside the printing area width, it sets the
absolute print position, but the left or right margin is set at
default value.
[Default]
[Reference] ESC \, GS P or GS $D0
[Example]
n%CSEn%CSE
n%CSE
n%CSEn%CSE
[Name] Select/cancel user-defined characters
[Format] ASCII ESC % n
Hex 1B 25 n
Decimal 27 37 n
[Range] 0 ≤ n ≤ 255
[Description] Selects or cancels the user-defined character set.
When the Least Significant Bit (LSB) of n is 0, the user-de-
fined character set is canceled.
When the LSB of n is 1, the user-defined character set is
selected.
(Tab.A.3)
www.ipcprint.com