Filter
Top Products
3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
273-
nVCSEnVCSE
nVCSE
nVCSEnVCSE
[Name] Set 90° rotated print mode.
[Format] ASCII ESC V n
Hex 1B 56 n
Decimal 27 86 n
[Range] 0 ≤ n ≤ 1
48 ≤ n ≤ 49
[Description] Turns 90° rotation mode on/off.
n is used as follows :
nn
n
nnnoitcnuFnoitcnuF
noitcnuF
noitcnuFnoitcnuF
84,0edomnoitator°09ffosnruT
94,1edomnoitator°09nosnruT
[Notes] • When underlined mode is turned on, the printer does not
underline 90° rotated characters. All the same it’s possible
select the underline mode.
• Double-width and double-height commands in 90° rotation
mode enlarge characters in the opposite directions from
double-height and double-width commands in normal mode.
• This command is not available in Page mode.
• If this command is entered in Page mode, the printer all the
same save the setting.
Default] n = 0
[Reference] ESC !, ESC -
HnLn\CSEHnLn\CSE
HnLn\CSE
HnLn\CSEHnLn\CSE
[Name] Set relative print position
[Format] ASCII ESC \ nL nH
Hex 1B 5C nL nH
Decimal 27 92 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Sets the print starting position based on the current position
www.ipcprint.com