Filter
Top Products
3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
453-
HnLnL SGHnLnL SG
HnLnL SG
HnLnL SGHnLnL SG
[Name] Set left margin
[Format] ASCII GS L nL nH
Hex 1D 4C nL nH
Decimal 29 76 nL nH
[Range] 0 ≤ nL, nH ≤ 255
[Description] Sets the left margin.
• The left margin is set to [(nL + nH × 256) × (horizontal mo-
tion unit)] inches.
Printable
Left margin Printing area width
[Notes] • This command is enabled only if set at the beginning of the
line.
• If the setting exceeds the printable area, the maximum
value of the printable area is used.
• If the left margin + printing area width is greater than the
printable area, the printing area width is set at maximum
value.
• The horizontal and vertical motion unit are specified by
GS P or GS $D0. Changing the horizontal or vertical motion
unit does not affect the current left margin.
• The GS P or GS $D0 command can change the horizontal
(and vertical) motion unit.
• However, the value cannot be less than the minimum hori-
zontal movement amount and it must be in even units of the
minimum horizontal movement amount.
[Default]
[Reference] GS P or GS $D0, GS W
[Example]
www.ipcprint.com