Filter
Top Products
3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM210/216
493-
• In count-up mode, if the counter value set by this command
goes out of the counter operation range set by GS C 1 or
GS C ; it is forced to revert to the minimum value.
• In count-down mode, if the counter value set by this com-
mand goes out of the counter operation range set by GS C 1
or GS C ; it is forced to revert to the maximum value.
[Default]
[Reference] GS C 0, GS C1, GS C 2, GS C ;
[Example]
]m[neSG]m[neSG
]m[neSG
]m[neSG]m[neSG
[Name] Ejector commands
[Format] ASCII GS e n [m]
Hex 1D 65 n [m]
Decimal 29 101 n [m]
[Range] 1 ≤ n ≤ 6
[Description] This command checks tickets ejector.
n = 1
n = 2 Ticket retracted (only if Paper retracting is enabled)
n = 3 Ticket produced with m steps (1 step = 0.625 mm)
n = 4
n = 5 Ticket ejection
n = 6 Transmit the status byte of the ejector
tiBnO/ffOxeHlamiceD
nuFnoitc
0
ffO000
.ecnadnubanitneserprepaP
nO101
.dnerepapraeN
1Off00 0
OotdexiF.desutoNff.
2
ffO000
.)tneserptonrepap(rosnesdnerepaP
nO404
.)tneserprepap(rosnesdnerepaP
3
ffO000
.tuptuoehtnotneserptontekciT
nO808
.tuptuoehtnotneserptekciT
4
Off00 0
rotomreppetss'retnirPo.ff
nO0161
rotomreppetss'retnirPno.
5
ffO000
.fforotomrotcejE
nO0223
.norotomrotcejE
6
ffO000
.rorretoN
nO0446
.rorrE
7
ffO000
.etuorrepapeerF
nO08821
.majrepaP
www.ipcprint.com