Filter
Top Products
38
Settings menu
Audio: allows adjustments to Volume of the internal speaker and allows a
chime to play when starting the projector. Adjustments can also be made
from the projector’s keypad and the remote.
Sources: determines which source the projector checks first for active video
during power-up. When Autosource is selected, the Source Enable feature
indicates which sources the projector attempts to lock onto. You can use the
Source Enable feature to eliminate certain sources from this search, which
will speed the search. The source options are Computer for a computer,
progressive DVD, or HDTV source, Video 1 for S-video connections, Video
2 for component video connections and Video 3 for composite video
sources. By default, the check boxes for all sources are checked. Uncheck a
source box to eliminate it from the search. When Autosource is not checked,
the projector defaults to the source selected in Sources. To display another
source, you must manually select one by pressing the Computer or Video
button on the remote or keypad.
System>Rear: reverses the image so you can project from behind a translu-
cent screen. Ceiling: turns the image upside down for ceiling-mounted pro-
jection. Low Power: toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter. Display Messages: displays status messages (such as “Searching” or
“Mute”) in the lower-left corner of the screen.Translucent OSD: makes the
menus translucent. This prevents the image from being completely covered
by the menus while you are making image adjustments. Screen Saver Off:
prevents the screensaver on your computer from being activated if the USB
portion of the M1 is plugged into the computer. This function was previ-
ously called NND. Screen Trigger: turns on the 12 volt DC output switch
on the connector panel. Power Save: automatically turns the lamp off after
no signals are detected for 20 minutes. After 10 additional minutes with no
signal, the projector powers down. If an active signal is received before the
projector powers down, the image will be displayed. After an additional 10
minutes with no signal, the projector powers down and can be toggled off.
If an active signal is received before the projector powers down, the image
will be displayed.
Settings menu
Audio
Sources
Source
Enable
System menu
SP4805-02_usrguide.fm Page 38 Friday, June 11, 2004 8:22 AM