Filter
Top Products
37
1
Turn off the projector and unplug the power cord.
2 Wait 60 minutes to allow the projector to cool thoroughly.
3 Remove the lamp door by (a) removing the screw on the side of the lamp door,
(b) lifting the door off.
4 Loosen the captive screw that attaches the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an environmentally
proper manner.
5 Install the new lamp housing and tighten the screw.
6 Re-attach the lamp connector to the projector.
7 Replace the lamp door by sliding it into place.
8 Plug in the power cord and press the Power button to turn the projector back on.
9 To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours. See page 31 for details.
turn off and unplug
projector
wait 60 minutes
(a)
(b)
loosen screw