InFocus IN3926 Projector User Manual


 
37
4
The Basic Setting page allows you to configure ifPresenter.
i. To change the ifPresenter interface language, click the down arrow to reveal a
drop-down list and select a desired language. Click Apply.
ii. Users can change the size parameters of the frame in Fi
xedSize capture mode
by modifying width and height on this page and click Apply to make changes
take effect.
iii. User can use the mirror driver for presenter
capture image, if the system has
installed the mirror driver.
iv. To allow notification messages to appear, click Ye
s. Click Apply.
v. The Software Information is available on this page.
5 The Advanced Setting page allows you to configure ifPresenter.
i. To adjust the image quality, click the down arrow to reveal a drop-down list
and select a desired quality level. The higher image quality you select, the
higher network transfer speed is required. Select a YUV sample format
between YUV444 and YUV420. Compared to format YUV420, format YUV
444 provides better image quality but may slow the loading and playing
speed. Click Apply after your selections.
ii. To adjust the capture rate,
move the slide bar. The network bandwidth may
also affect the performance.
iii. Network port setting for fixed or manual type.