Filter
Top Products
39
Displaying pictures with a USB storage device
The projector has a built-in application which can display images from a USB
storage device. It can eliminate the need for a computer source.
The projector supports the following image formats:
File format Maximum pixel size
JPEG 8000 x 8000
GIF/TIFF/PNG/BMP 1280 x 800
• Progressive JPEG files are not supported.
• Some JPEG files may not display clearly.
To display images from a USB storage device:
1 Plug the USB storage device into one of the USB Type A connectors.
2 Press the Source button and choose the USB A (Type-A) input. Note: If no
other sources are connected and Auto Source is on, the projector will
automatically select the USB A source.
3 Folders and supported files are displayed in thumbnail view.
• To scroll through the thumbnails, use the arrow keys on your remote or the
projector keypad.
• To open a file, highlight the file and press Enter. Press Enter again to close
the file.
• To go back to the previous screen, select the thumbnail with an up arrow in
the top left corner of the screen, and press Enter.
• To access additional USB display options, press the Menu button and then
the Enter button. To close the USB Display menu, press the Menu button
and then the Enter button again.
• To choose or cancel a menu option, use the left and right arrow buttons to
highlight the option. Use the up and down arrow buttons to make a selection
and press the Enter button.
When viewing thumbnails
• Next: Selects the next folder/image.
• Previous: Selects the previous folder/image.
• Thumbnail/Full Screen/SlideShow: Displays the selected image(s) in
Thumbnail, Full Screen or SlideShow mode.
• NameOrder/ExtendOrder/SizeOrder/TimeOrder: Sets the images to be
displayed in the order of filenames, filename extension, file sizes, or time the
photos were taken.
• EXIF OFF/EXIF ON: Toggles the EXIF data associated with the image on
and off.
• PathDisp OFF/PathDisp ON: Toggles the display of the file name and path
on and off.
When viewing slide shows
• Stop: Stops the slide show.
• Fast/Medium/Slow: Sets the time interval each image displays. Fast
displays an image every 3 seconds. Medium displays an image
approximately every 10 seconds. Slow displays an image approximately
every 15 seconds. Note: The actual display time varies based on the file size.