Filter
Top Products
33
Settings menu
Audio: allows adjustments to Volume of the internal speaker. Adjustments
can also be made from the projector’s keypad and the remote.
Sources: Power-up Source determines which source the projector checks
first for active video during power-up. When the Autosource feature is On,
the projector automatically finds the active source, checking the Power-up
Source first. The options are Computer 1 for a computer source, and Video
1 (for S-video connections), and Video 2 (for composite video connections)
for video sources. When this feature is Off, the projector defaults to the
source selected in Power-up Source. To display another source, you must
manually select one by pressing the Computer or Video button on the
remote or keypad.
System: Rear reverses the image so you can project from behind a translu-
cent screen. Ceiling turns the image upside down for ceiling-mounted pro-
jection. Display Messages displays status messages (such as “Searching” or
“Mute”) in the lower-left corner of the screen. NND prevents your notebook
computer from going into Screen Save mode if the USB cable is connected.
Power Save automatically turns the lamp off after no signals are detected
for 20 minutes. After an additional 10 minutes with no signal, the projector
powers down and can be toggled off. If an active signal is received before
the projector powers down, the image will be displayed. When Power Save
is enabled, Screen Save is disabled. Screen Save automatically blanks the
screen with a black color after no signals are detected for a preset number of
minutes. The image returns when an active source is detected or a remote or
keypad button is pressed.
Settings menu
Audio
Power-up
Source
Sources
System menu
Screen Save