Filter
Top Products
21
Using the audio
To play sound from the projector, connect your source to the Audio In con-
nector on the projector.
To adjust the volume, mute or turn off the projector’s chime, use the Audio
menu (see page 28).
Troubleshooting audio
If there is no sound, check the following:
• Make sure the audio cables are connected.
• Make sure mute isn’t active in the Audio menu.
• Make sure the volume is turned up enough.
• Adjust the audio source.
• If playing a video, make sure the playback has not been paused.
connect audio connectors on A/V cable
audio in
serial control
Pr
Pb
Y
trigger
adjust volume