Filter
Top Products
11
Shutting down the projector
Auto Off Time
The projector also has an Auto Off Time feature that automatically turns the
projector off after no active sources are detected and no user interaction with the
projector is performed for 30 minutes. By default, this feature is off. You can
change the length of time, see page 30.
Turning off the projector
To turn the projector off, press the Power button on the remote or keypad. The
lamp turns off and the LED blinks amber for 1 minute while the fans continue to
run to cool the lamp. When the lamp has cooled, the LED lights amber and the
fans stop. Unplug the power cable to completely power off the projector.
Troubleshooting your setup
If your image appears correctly on the screen, skip to the next section. If it does
not, troubleshoot the setup.
The Status Indicator Panel on top of the projector indicates the state of the
pro
jector and can help you troubleshoot
.
Table 2: Status indicator light behavior and meaning
Icon Meaning
Power, solid amber
Power, blinking green
Power, solid green
Power, blinking amber
The projector is plugged in.
The power button has been pressed and
t
he software is initializing.
The projector is on and initialized.
The power button has been pressed to
tu
rn the projector off and the fans are
running to cool the projector.
Thermometer, solid red
The projector is too hot. Make sure the
vents aren’t blocked (see page 18). Turn
off the projector and wait one minute,
th
en turn the projector on again. Contact
Technical Support if the problem persists.
Visit www.infocus.com/support to contact
service.
Lamp
, solid red
If the Lamp LED is on and the other LEDs
are off, turn off the projector and wait
one minute; then turn the projector on
again. If the LED behavior continues (and
the other LEDs are off), replace the lamp
and reset the lamp timer. If multiple LEDs
are on simultaneously or if the behavior
continues, contact Technical Support.
Repair may be needed.