Filter
Top Products
User Guide
ICE D-20 Wireless Broadband Gateway Table of Contents
Huawei Technologies Proprietary
3-3
3.2.4 Querying the Version
After login to D-20, the steps of entering the version information querying page are
shown as follows.
1) Click Basic in the operation navigation area.
2) Select the Version tab in the user operation area to display the system version
information. See
Figure 3-4.
Figure 3-4 Version information
3.3 Configuring Parameters
3.3.1 Configuring LAN
I. Entering the configuration page of LAN
After login to D-20, the steps of entering the configuration page of LAN are shown as
follows.
1) Click Advanced in the operation navigation area.
2) Enter the LAN/Basic page.
In the user operation area, you can configure the following parameters including the
LAN interface IP address of D-20, subnet mask, and the relative configuration item of
DHCP. Click Apply and then D-20 auto restarts to validate the configurations.
Figure 3-5 shows the configuring page.