Filter
Top Products
Intel Server Control Installation Guide
11
Using the Direct Platform Control (DPC) Console
1. Connect to the appropriate server.
2. Select Reboot Service Partition from the Action menu.
Using the Client System Setup Utility (CSSU)
Select (Re)Connect from the Server menu.
Enabling LAN Events
LAN Events are disabled by default and need to be enabled during cc2300/cc3300 server setup.
LAN events are passed to the LAN Event Viewer software on the client.
1. Insert the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource CD
into the CD drive.
2. Restart the server.
3. When the “F2 to enter setup” message appears, quickly press F2.
4. In Setup, use the arrow keys to select the Boot menu.
5. Use the arrow keys to select Boot Device Priority then press Enter.
6. Select ATAPI CDROM and use the + key to move the selection to the top of the list.
7. Press F10.
8. Select Yes to confirm saving of the current settings and press Enter. The server restarts and
boots from the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource
CD.
9. When the menu appears, use the arrow keys to select the Utilities menu and press Enter.
10. Select “Run System Setup Utility” under the “Utilities” menu. You will see SSU executables
installed the first time and then the Server SSU launches.
11. In the Available Tasks list select Platform Event Manager and click OK.
12. Select “Configure PEP”.
13. Click on “Options” and select “Configure Event Actions”.
14. Enable all paging actions and Save.
15. Select “Configure LAN”.
16. Click on “Options” and select “Configure Event Actions”.
17. Enable all LAN-Alerting actions and save.
18. Remove the CD and reboot the server.