Intel D425KT Computer Hardware User Manual


 
Intel Desktop Board D425KT Product Guide
18
Security Passwords
The BIOS includes security features that restrict whether the BIOS Setup program can
be accessed and who can boot the computer. A supervisor password and a user
password can be set for the BIOS Setup and for booting the computer, with the
following restrictions:
The supervisor password gives unrestricted access to view and change all Setup
options. If only the supervisor password is set, pressing <Enter> at the password
prompt of Setup gives the user restricted access to Setup.
If both the supervisor and user passwords are set, you must enter either the
supervisor password or the user password to access Setup. Setup options are then
available for viewing and changing depending on whether the supervisor or user
password was entered.
Setting a user password restricts who can boot the computer. The password
prompt is displayed before the computer is booted. If only the supervisor
password is set, the computer boots without asking for a password. If both
passwords are set, you can enter either password to boot the computer.
For instructions on resetting the password, see Clearing Passwords on page 36.
Power Management Features
Power management is implemented at several levels, including:
Software support through the Advanced Configuration and Power Interface (ACPI)
Hardware support:
Power connector
Fan header
+5 V standby power indicator LED
LAN Wake capabilities
Instantly Available PC technology
Wake from USB
Wake from PS/2 devices
PME# wakeup support
Wake from serial port
ACPI
ACPI gives the operating system direct control over the power management and Plug
and Play functions of a computer. The use of ACPI with the Desktop Board requires an
operating system that provides full ACPI support.
Hardware Support
Fan Header
The Desktop Board has a 3-pin chassis fan header. See Figure 10 on page 33 for the
location of the chassis fan header.