Filter
Top Products
Installing and Replacing Desktop Board Components
41
1. Observe the precautions in "Before You Begin" (see page 23).
2. Turn off all peripheral devices connected to the computer. Disconnect the
computer’s power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 13).
5. P
ush
the battery retention clip aside and remove the battery from the connector as
shown in Figure 13. Note the orientation of the “+” and “-” on the battery.
6. Instal
l the n
ew battery in the connector, making sure to orient the “+” and “-”
correctly.
7. Replace the computer cover.
Figure 13. Removing the Battery