Intel D815EEA Computer Hardware User Manual


 
Intel Desktop Board D815EEA Product Guide
62
Boot Menu
To access this menu, select Boot from the menu bar at the top of the screen.
Maintenance Main Advanced Security Power
Boot
Exit
IDE Drive Configuration
The menu represented in Table 24 is used to set the boot features and the boot sequence.
Table 24. Boot Menu
Feature Options Description
Quiet Boot Disabled
Enabled (default)
Disabled displays normal POST messages.
Enabled displays OEM graphic instead of POST messages.
Quick Boot Disabled
Enabled (default)
Enables the computer to boot without running certain POST
tests.
Scan User Flash
Area
Disabled (default)
Enabled
Enables the BIOS to scan the flash memory for user binary
files that are executed at boot time.
After Power
Failure
Stays Off
Last State (default)
Power On
Specifies the mode of operation if an AC power loss occurs.
Power On restores power to the computer.
Stay Off keeps the power off until the power button is pressed.
Last State restores the previous power state before power
loss occurred.
On Modem Ring
Stay Off (default)
Power-On
In APM mode only, specifies how the computer responds to
an incoming call on an installed modem when the power is off.
On LAN Stay Off
Power-On (default)
In APM mode only, determines how the system responds to a
LAN wake up event.
On PME
Stay Off (default)
Power-On
In APM mode only, determines how the system responds to a
PCI power management event.
1
st
Boot Device
2
nd
Boot Device
3
rd
Boot Device
4
th
Boot Device
5
th
Boot Device
Floppy
ARMD-FDD
(Note 1)
ARMD-HDD
(Note 2)
IDE-HDD
(Note 3)
ATAPI CDROM
Intel UNDI, PXE 2.0
Disabled
Specifies the boot sequence from the available devices. To
specify boot sequence:
1. Select the boot device with <> or <>.
2. Press <Enter> to set the selection as the intended boot
device.
The operating system assigns a drive letter to each boot
device in the order listed. Changing the order of the devices
changes the drive lettering. The default settings for the first
through fifth boot devices are, respectively:
Floppy
IDE-HDD
ATAPI CDROM
Intel UNDI, PXE 2.0
Disabled
continued