Filter
Top Products
7
1 Desktop Board Features
Table 1 describes the board’s major features.
Table 1. Feature Summary
Characteristic Specification
Form Factor
ATX (12.0 inches by 8.2 inches)
Processors
• Intel
®
Pentium
®
III processor family with FC-PGA (Flip Chip Pin Grid Array)
package supporting 100 MHz and 133 MHz system bus frequency
• Intel
®
Celeron™ processor family with PPGA (Plastic Pin Grid Array) and
FC-PGA package supporting 66 MHz system bus frequency
Memory
Three 168-pin Dual Inline Memory Module (DIMM) sockets supporting:
• 100 MHz PC100 SDRAM (all system bus frequencies)
• 133 MHz PC133 SDRAM (only with 133 MHz system bus frequency processors)
Chipset
Intel
®
815E Chipset, consisting of:
• Intel
®
FW82815E Graphics Memory Controller Hub (GMCH)
• Intel
®
FW82801BA I/O Controller Hub (ICH2)
• Intel
®
FW82802AB 4 Mbit Firmware Hub (FWH)
I/O Control
SMSC LPC47M102 LPC bus I/O controller
Video
AGP universal connector supporting:
• 1x, 2x, or 4x AGP (AGP 2.0 Compliant) or,
• GPA (Graphics Performance Accelerator) cards for integrated graphics local
memory
• Digital Video Output (DVO) connector (optional)
• Rear panel VGA connector
Power Management
Support for both ACPI 1.0 and APM 1.2
PC Design Compliance
PC 99 and PC 99A
Peripheral Interfaces
• Two serial ports: one back panel, and one internal connector
• Four USB ports: two back panel, and optionally, two front panel
• One parallel port
• Two IDE interfaces with Ultra ATA/66, and ATA/100 support
• One diskette drive interface
Expansion Capabilities
Six add-in card expansion slots:
• Five PCI bus add-in card slots (SMBus routed to PCI slot 2)
• One AGP universal slot supporting 1x, 2x, and 4x AGP cards
BIOS
• Intel/AMI BIOS
• Intel
®
82802AB 4 Mbit Firmware Hub (FWH)
• Support for Advanced Power Management (APM), Advanced Configuration
and Power Interface (ACPI), Plug and Play, and SMBIOS
Wake on LAN
†
Technology
Support for system wake up using an add-in network interface card with remote
wake up capability