Filter
Top Products
P4 nForce4 SLI Series Motherboard - 40 -
English
2-2 Advanced BIOS Features
"#" : This option is available only when the processor you install supports Intel
®
Hyper-
Threading Technology.
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.
First / Second / Third Boot Device
Floppy Select your boot device priority by Floppy.
LS120 Select your boot device priority by LS120.
Hard Disk Select your boot device priority by Hard Disk.
CDROM Select your boot device priority by CDROM.
ZIP Select your boot device priority by ZIP.
USB-FDD Select your boot device priority by USB-FDD.
USB-ZIP Select your boot device priority by USB-ZIP.
USB-CDROM Select your boot device priority by USB-CDROM.
USB-HDD Select your boot device priority by USB-HDD.
Legacy LAN Select your boot device priority by LAN.
Disabled Disable this function.
ROM Boot Priority
Use this function to select onboard RAID or PCI SCSI boot ROM order if the boot ROM of your
device cannot be auto initiated.
SCSI Set boot ROM order to SCSI devices.
PROMISE Set boot ROM order to devices on the Promise controller. (Default)
Nvidia RAID Set boot ROM order to devices on the Nvidia RAID controller.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
(Note) This item will show up when you install a processor that supports this function.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Advanced BIOS Features
` Hard Disk Boot Priority [Press Enter]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
ROM Boot Priority1 [PROMISE]
Boot Up Floppy Seek [Disabled]
Password Check [Setup]
CPU Hyper-Threading
#
[Enabled]
Limit CPUID Max. to 3 [Disabled]
No-Execute Memory Protect
(Note)
[Enabled]
CPU Enhanced Halt (C1E)
(Note)
[Enabled]
CPU Thermal Monitor 2(TM2)
(Note)
[Enabled]
CPU EIST Function
(Note)
[Enabled]
Full Screen LOGO Show [Enabled]
Intel Onscreen Branding [Enabled]
Init Display First [PEG]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F3: Language12 F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Select Hard Disk Boot
Device Priority
Only for GA-8N-SLI Royal. Only for GA-8N-SLI Pro.