Filter
Top Products
P4 nForce4 SLI Series Motherboard - 50 -
English
Incorrect using these features may cause your system broken. For power end-user use only.
C.A.M.
(Note)
High Set clock ratio for frequency-locked CPU to High. (Default value)
Low Set clock ratio for frequency-locked CPU to Low.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection. The option will display "Locked" and
read only or will not show up if the CPU ratio is not changeable.
C.I.A.2
C.I.A.2 (CPU Intelligent Accelerator 2) is designed to detect CPU loading during software program
executing, and automatically adjust CPU computing power to maximize system performance.
Disabled Disable this function. (Default value)
Cruise Set C.I.A.2 to Cruise. Automatically increase CPU frequency(5%,7%) by CPU
loading.
Sports Set C.I.A.2 to Sports. Automatically increase CPU frequency(7%,9%) by CPU
loading.
Racing Set C.I.A.2 to Racing. Automatically increase CPU frequency(9%,11%) by CPU
loading.
Turbo Set C.I.A.2 to Turbo. Automatically increase CPU frequency(15,17%) by CPU
loading.
Full Thrust Set C.I.A.2 to Full Thrust. Automatically increase CPU frequency(17%,19%) by
CPU loading.
Warning: Stability is highly dependent on system components.
(Note) This item will show up when you install a processor that supports this function.
2-7 MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
MB Intelligent Tweaker(M.I.T.)
C.A.M.
(Note)
[High]
CPU Clock Ratio
(Note)
[16x]
C.I.A.2 [Disabled]
FSB Turbo Mode [Disabled]
System Clock Mode [Optimal]
x New FSB Speed (QDR) Auto
Current FSB Speed (QDR) 800.0 MHZ
Target FSB Speed (QDR) 800.0 MHZ
x New MEM Speed (DDR) Auto
Current MEM Speed (DDR) 533.3 MHZ
Target MEM Speed (DDR)) 533.3 MHZ
PCIE Frequency (MHz) [100.0000]
LDT Frequency [4x]
SLI Broadcast Aperture [Disabled]
DIMM OverVoltage Control [Normal]
PCI-E OverVoltage Control [Normal]
FSB OverVoltage Control [Normal]
SATAII OverVoltage Control [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3875V
Robust Graphics Booster [Auto]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F3: Language12 F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Only for GA-8N-SLI Royal. Only for GA-8N-SLI Pro.