Filter
Top Products
Appendix- 83 -
English
Create Arrays Manually
To create a new array manually, press <3> to enter the Define Array window. The Define Array
selection from the Main Menu allows users to begin the process of manually defining the drive elements
and RAID levels for one or multiple disk arrays attached to the Promise PDC20779 controller.
Halt on Error
When enabled, if the RAID controller detects an error, the boot process will stop when the FastTrak
BIOS appears and wait for your input. At that point, you can press <Ctrl>+<F> to enter the FastBuild
utility or press <ESC> to continue booting.
When disabled, the FastTrak BIOS will appear and show the Critical array, but the computer will
continue booting if you take no action.
Use arrow keys [] to move to a logical disk set and press ENTER to enter the Define Array Menu.
RAID Mode: Use Space key to change your selection between Stripe (RAID 0) or Mirror (RAID 1)
FastBuild (tm) Utility 2.03 (c) 2003-2005 Promise Technology, Inc.
[ Define Array Menu]
[ Drives Assignments] ]
[ Keys Available] ]
Logical Disk No RAID Mode Total Drv Status
Logical Disk 1 Stripe 0 Functional
Stripe Block: 64KB Gigabyte Rounding: OFF
[] Up [] Down [ESC] Exit [Space] Change Option [Ctrl-Y] Save
Channel:ID Drive Model Capacity (MB) Assignment
1:SATA ST3120026AS 120034 N
2:SATA ST3120026AS 120034 N
FastBuild (tm) Utility 2.03 (c) 2003-2005 Promise Technology, Inc.
[ Define Array Menu] ]
Halt On Error: Disable
[ Keys Available] ]
[] Up [] Down [ESC] Exit [Enter] Select [Space] Change HOE Option
Logical Disk No RAID Mode Total Drv Capacity (MB) Status
Logical Disk1 ---- ---- ----- ----
Logical Disk2 ---- ---- ----- ----
Logical Disk3 ---- ---- ----- ----
Logical Disk4 ---- ---- ----- ----