Filter
Top Products
BIOS SETUP
I815E User’s Manual 37
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.
USB Controller
The options for this field are Enabled and Disabled. By default, this field
is set to Enabled.
USB Keyboard Support
The options for this field are Enabled and Disabled. By default, this field
is set to Disabled.
Init Display First
This field allows the system to initialize first the VGA card on chip or the
display on the PCI Slot. By default, the PCI Slot VGA is initialized first.
AC97 Audio
The default setting of the AC97 Audio is Auto.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
POWER ON Function
This field allows powering on by the following methods:
Password Hot KEY Mouse Left Mouse Right
Any KEY BUTTON ONLY Keyboard 98
KB Power ON Password
This field allows you to set the power on function via the keyboard.
Hot Key Power ON
This field allows you to set the power on function via hot keys on the
keyboard including Ctrl-F1 to Ctrl-F12.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the board and you wish to use it. If you install an add-in FDC
or the system has no floppy drive, select Disabled in this field. This option
allows you to select the onboard FDD port.