INTRODUCTION
I815E User’s Manual 3
Specifications
Processor
Supported
Socket 370 for Intel Celeron / Pentium III (FC-PGA),
533MHz~1.4GHz, 66/100/133MHz Bus Speed
Chipset Intel 815E Chipset
GMCH: 82815 544-PIN BGA
ICH2: 82801BA 360-PIN BGA
FWH
BIOS Award BIOS; supports ACPI
System Memory 1x DIMM socket supports up to 256MB capacity
PC100/PC133 DIMM modules supported
LPC I/O Chipset ITE IT8712 (keyboard controller is built-in)
I/O Features 1x FDD (up to 2.88MB, 3 Mode, LS120)
1x Parallel Port (EPP, ECP Port)
2x Serial Ports (1x RS232 and 1x RS232/422/485)
1x IrDA TX/RX Headers
Bus Master IDE 2x IDE interfaces for up to 4 devices; supports PIO Mode
3/4 or UDMA33/66/100 HDD, and ATAPI CD-ROM
VGA 815E integrated graphics
Shared memory
4MB display cache on board
VGA CRT connector on board
Pin header for optional TV-Out (CH7007) daughter board
with S-Video & RCA jacks
Audio ICH2 integrated audio with AC97 codec
LAN ICH2 integrated Ethernet controller
10Base-T / 100Base-TX protocol
Primary RJ-45 Ethernet connector on board
Secondary LAN
(Optional)
Optional Intel 82559 Ethernet controller
10Base-T / 100Base-TX protocol
Optional Secondary RJ-45 Ethernet connector on board
USB Two USB ports on board
Another two USB ports supported by USB pin header
IrDA Pin header
Hardware
Monitoring
Built-in IT8712
Monitors CPU/system temperature and voltages
Watchdog Timer
256-level Watchdog timer
P/S Connector
ATX type power supply connector
Rear Side
Connectors
PS/2 keyboard, PS/2 mouse, Primary RJ45 connector;
optional secondary RJ-45 connector, printer port, VGA
CRT, USBx2, serial Port, Microphone, speaker
Form Factor
5.25-inch SBC (Little Board)
Dimensions
203mm x 146mm (7.99” x 5.75”)