Filter
Top Products
Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" serial (SATA) hard
disk drives with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary
drivers and utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, and turn it over and remove the battery (page 2 - 6).
2. Locate the component bay cover and remove screws - .
3. Remove the bay cover .
4. The hard disk assembly will be visible at point on the mainboard.
Figure 2
HDD Assembly
Removal
a. Remove the screws.
b. Remove the cover and lo-
cate the HDD.
12. Component Bay
Cover
•11 Screws
1 11
12
13
a.
b.
12
13
1
3
2
4
5
7
6
8
9
10
11