Filter
Top Products
Disassembly
Removing the Wireless LAN Module 2 - 15
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, turn it over and remove the battery (page 2 - 6) and the component bay cover (page 2 - 7).
2. The Wireless LAN module will be visible at point on the mainboard.
3. Carefully disconnect cables
- , and then remove screw .
4. The Wireless LAN module (Figure 10c) will pop-up, and you can remove it.
Figure 10
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
d. Remove the WLAN
module.
Note: Make sure you
reconnect the antenna
cable to “1” + “2”
socket (Figure 10b).
1
2 3 4
5
4
b.
c.
a.
32
1
d.
5
5
5. Wireless LAN Module
•1 Screw