Filter
Top Products
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
39
AutoScan:
This function allows you to view each camera image in numerical
sequence under 1-Cam Display mode. Check AutoScan to enable
this function and define the scan interval from 1 to 60 seconds
(defaults 3 seconds). When in this function is enabled, you need to
return to the main menu and click
to start the AutoScan
function. During AutoScan, you can click
…
Focus Camera to jump to any camera. To stop the AutoScan
function, click
again.
4. Video
For Video Standard, you need to choose from NTSC and PAL
according to the system you are using.
5. Display & Recording Rate
With this button you can set
display and recording rate
by camera. You will see the
following dialog box when
you click this button. There
are 5 levels of display and
recording rate. Drag the
bar to adjust the display/
recording rate for each
camera.
In case All is checked, you will see that while you’re adjusting the
rate for one camera, the rate of other cameras will be adjusted at
the same time. Cameras that are adjusted together use the same
video chip on the video capture card.
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
40
6. 640 x 480 Resolution
The utility provides your particular demand on the better 640 x
480 resolution for the specific cameras. For EYES Pro/MP2016/
MP3000, you can check the cameras to perform the better
resolution by clicking this button. Note that the cameras are
arranged to be sets according to the same video chip on the video
capture card. For MP5000, you can set all cameras randomly to
perform 640 x 480 resolution. The arranged camera sets are listed
as follows:
That too many cameras were selected to be 640 x 480
resolution will result in overloading for system. For the
further information please refer to our website contact
your distribution.
7. UPS (Uninterruptible Power Supply)
It enhances the security for system to warn administrators and
users if AC power fails and proceeds with system shutdown before
the end of battery backup power is reached. The UPS device should
be connected to your computer (refer to your UPS user’s guide)
before the presetting of this task.
Product Camera Sets
4 EYES Pro 1
,
2
,
3
,
4
8 EYES Pro 1
,
2
,
3
,
4 5
,
6
,
7
,
8
1
,
2
,
3
,
4 5
,
6
,
7
,
8
16 EYES Pro
9
,
10
,
11
,
12 13
,
14
,
15
,
16
MP2016
1,2,3,4,5,6,7,8,9,10,11,
12,13,14,15,16
MP3004 1
,
2
,
3
,
4
MP3008 1
,
5 2
,
6 3
,
7 4
,
8
1
,
5
,
9
,
13 2
,
6
,
10
,
14
MP3016
3
,
7
,
11
,
15 4
,
8
,
12
,
16
MP5004 1 2 3 4
MP5008 1
,
2
,
3
,
4
,
5
,
6
,
7
,
8
1
,
9 2
,
10 3
,
11 4
,
12
MP5016
5,13
6
,
14 7
,
15 8
,
16