Filter
Top Products
Intel
®
NetStructure™ MPCHC5525 System Master Processor Board IPMI Reference Driver User’s Guide 25
Supported IPMI Commands and BMC/PM Addresses
4.2.6 Sensor Device Commands
All commands in this category defined as mandatory by the IPMI specification are implemented. In
addition, the following optional commands are available.
All commands can be used in every operation mode.
4.2.7 ICMB Bridge Commands
All commands in this category defined as mandatory by the IPMI specification are implemented. In
addition, the following optional commands are available.
Table 7. Implemented Optional Sensor Device Commands
Command NetFn CMD
Get Device SDR Info S/E 20
16
Get Device SDR S/E 21
16
Reserve Device SDR Repository S/E 22
16
Get Sensor Reading Factors S/E 23
16
Set Sensor Hysteresis S/E 24
16
Get Sensor Hysteresis S/E 25
16
Set Sensor Threshold S/E 26
16
Get Sensor Threshold S/E 27
16
Set Sensor Event Enable S/E 28
16
Get Sensor Event Enable S/E 29
16
Re-arm Sensor Events S/E 2A
16
Get Sensor Reading S/E 2D
16
Set Sensor Type S/E 2E
16
Get Sensor Type S/E 2F
16
Set Event Receiver S/E 00
16
Get Event Receiver S/E 01
16
Platform Event S/E 02
16
Table 8. Implemented Optional ICMB Bridge Commands (Sheet 1 of 2)
Command NetFn CMD
Get Bridge State Bridge 00
16
Set Bridge State Bridge 01
16
Get ICMB Address Bridge 02
16
Set ICMB Address Bridge 03
16
Set Proxy Address Bridge 04
16
Get Bridge Statistics Bridge 05
16
Clear Bridge Statistics Bridge 08
16
Get Proxy Address Bridge 09
16