Filter
Top Products
28
Intel(R) SpeedStep (tm) tech
The optional settings are: Enabled; Disabled.
Disable: Disable GV3;
Enabe: Enable GV3.
InteL(R) TurboMode tech
Turbo mode allows processor cores to run faster than marked frequency in specific
condition.
Intel(R) C-STATE tech
CState: CPU idle is set to C2/C3/C4.
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the
chipset registers. These registers control most of the system options in the computer.
Configure DRAM Timing by SPD
The optional setting is: Auto; Manual.
DRAM Command Rate
The optional settings are: Auto; 2T; 1T.
DRAM Margin Ranks
The optional settings are: Disabled; Enabled.
Memory Hole
The optional settings are: Disabled; 15MB-16MB.
Initiate Graphics Adapter
Select which graphics controller to use as the primary boot device. The optional
settings are: PCI/PCIE; PCIE/PCI.