Filter
Top Products
Intel® Server Board SE7230NH1-E and Intel® Server Platform SR1475NH1-E User’s Guide 5
Configuration Jumpers
Table 2. Configuration Jumpers
Jumper Name What happens at system reset...
CMOS Configuration Pins 1-2 should be jumpered for normal system operation.
If pins 2-3 are jumpered, the system will enter a configuration menu
that is only available by jumpering these pins. These pins should not
be jumpered for normal operation.
If the jumper is removed, the system will attempt to recover the BIOS
by loading the BIOS code into the flash device from a floppy disk.
This is typically used when the BIOS has become corrupted. The
jumper should not be removed for normal operation.
Clear CMOS Pins 1-2 should be jumpered for normal system operation.
If pins 2-3 are jumpered, the CMOS settings will be cleared on the
next reset. These pins should not be jumpered for normal operation.
TP01794
3
2
Clear CMOS
Jumper (J9G3)
Clear
Normal
3
2
CMOS Configuration
Jumper (J9H3)
Config
Normal
B
A
Off - Recovery