Intel SR1475NH1-E Server User Manual


 
Intel
®
Server Board SE7230NH1-E and Intel
®
Server Platform SR1475NH1-E User’s Guide 13
3 Hardware Installations and
Upgrades
Before You Begin
Before working with your server product, pay close attention to the “Safety Information”
at the beginning of this manual.
Tools and Supplies Needed
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
Needle nosed pliers
Antistatic wrist strap and conductive foam pad (recommended)
Installing and Removing Memory
The silkscreen on the board for the DIMMs displays DIMM_2B, DIMM_1B, DIMM_2A,
DIMM_1A starting from the edge of the board. DIMM_1A is the socket closest to the
processor socket. See "Memory" for a discussion of the memory requirements and
options. See "Additional Information and Software" for a link to the list of tested DIMMs.
Note: The DIMMs being installed must be DDR2 DIMMs (see letter “A” in Figure 3). DDR
DIMMs will not physically fit into a server board designed to support DDR2 DIMMs (see
letter “B” in Figure 3).
Figure 3. DDR vs. DDR2 DIMMs