Filter
Top Products
11
2. Standard CMOS Setup
This setup page includes all the basic configuration parameters of the BIOS. Including
the date, VGA, FDD and the HDDs settings. Use the ↑↓←%→ keys to select the items
and press <Enter> to confirm and enter the sub-menu.
Time (hh: mm: ss):
You can set the time in this item: hour (hh), minute (mm) and second (ss).
Date (mm: dd: yy):
You can set the date in this item: month (mm), date (dd) and year (yy).
Drive A:
If you have installed the floppy disk drive here, then you can select the type of floppy
drive it can support. Available option: (None) (360K, 5.25 inch) (1.2M, 5.25 inch)
(720K, 3.5 inch) (1.44M, 3.5 inch) (2.88M, 3.5 inch)
IDE Devices:
System will auto detect IDE devices. The IDE devices are auto detected by default.
Primary IDE Master Auto
Primary IDE Slave Auto
Secondary IDE Master Auto
Secondary IDE Slave Auto
3. Advanced CMOS Setup
The Advanced CMOS Setup Screen is used to change the device order your system
Boots from, and the amount of time before your system enters POST.
First Boot Device:
Specifies the boot order for all devices.
Second Boot Device:
Specifies the boot order for all devices.
Third Boot Device:
Specifies the boot order for all devices.
Fourth Boot Device:
Specifies the boot order for all devices.
Try Other Boot Devices:
Set this option to “Yes” to instruct AMIBIOS to attempt to boot from another drive in
the system when all the specific Boot Devices above have undetected boot drive.