Filter
Top Products
29
Delete: Select one of the entries in the static IP address table at the bottom of
the page and click “Delete” to remove the entry.
New: Click “New” to clear the text boxes and add required information to
create a new entry.
Dynamic
This screen enables the user to set NAT parameters.
NAT: Click the radio
buttons to enable or
disable the NAT function.
Transmit: Click the radio
buttons to set the desired
transmit parameters:
Disabled, RIP 1 or RIP 2.
Receive: Click the radio
buttons to set the desired
receive parameters: Disabled, RIP 1 or RIP 2.
Routing Table
This screen enables the user to view the routing table for the router. The routing
table is a database created by the router that displays the network
interconnection topology.
Network Address:
Displays the network IP
address of the connected
node.
Network Mask: Displays
the network (subnet) mask
of the connected node.
Gateway Address:
Displays the gateway
address of the connected node.
Interface: Displays whether the node is connected via a WAN or LAN.
Metric: Displays the metric of the connected node.
Type: Displays whether the node has a static or dynamic IP address.
Access
This page enables you to define access restrictions; set up protocol and IP
filters; create virtual servers; define access for special applications, such as
games; and set firewall rules.
CONFIGURATION