Filter
Top Products
33
Enable: Click to enable
or disable the virtual
server.
Name: Type a
descriptive name for the
virtual server.
Protocol: Select a
protocol (TCP or UDP) to
use with the virtual server.
Private Port: Type the port
number of the computer
on the LAN that is being
used to act as a virtual
server.
Public Port: Type the port
number on the WAN that
will be used to provide access to the virtual server.
LAN Server: Type the LAN IP address that will be assigned to the virtual server.
Add: Click to add the virtual server to the table at the bottom of the screen.
Update: Click to update information for the virtual server if the user has
selected a list item and has made changes.
Delete: Select a list item and click “Delete” to remove the item from the list.
New: Click to erase all fields and enter new information.
Special AP
This screen enables the user to specify special applications, such as games,
that require multiple connections that are inhibited by NAT. The special
applications profiles are listed in the table at the bottom of the page. Note:
When selecting items in the table at the bottom, click anywhere in the item.
The line is selected, and the fields automatically load the item’s parameters,
which the user can then edit.
Enable: Click to enable or disable the application profile. When the profile is
enabled, users will be able to connect to the application via the router’s WAN
connection. Click “Disabled” on a profile to prevent users from accessing the
application on the WAN.
Name: Type a descriptive name for the application.
Trigger: Defines the outgoing communication that determines whether the user
has legitimate access to the application.
• Protocol: Select the protocol (TCP, UDP or ICMP) that can be used to
access the application.
CONFIGURATION