Filter
Top Products
3. HARDWARE INSTALLATION
FRONT PANEL
Power — This indicator lights green when the hub is receiving power;
otherwise it is off.
Status — This indicator blinks green when the router is working. If it stays on or
off, the router is not working.
WAN (Link/ACT) — This indicator lights green when the WAN port has
been connected to an xDSL/cable modem successfully. It blinks green while
the WAN port is transmitting or receiving data on the xDSL/cable modem.
WLAN (ACT) — This indicator lights green when there are wireless devices
connected and transmitting data to the router.
Local Network (Link/ACT) — These indicators light green when the LAN
ports have been connected successfully. They blink green while the LAN ports
are accessing data.
REAR PANEL
Antenna — There is one 2dBi gain antenna for wireless connection.
LAN (1-4) — Four RJ-45 10/100Mbps Auto-MDIX ports are for connecting to
either 10Mbps or 100Mbps Ethernet connections.
WAN — There is an RJ-45 10/100Mbps Auto-MDIX port for the WAN that
accommodates the xDSL/cable modem.
DC IN (POWER JACK) — Plug the power adapter into this power jack.
RESET — Use a pin-shaped item to push in to reset the device to factory
default settings. It will be useful when the login password is forgotten; and
will reset to default settings.
9
Front Panel
Rear Panel
HARDWARE INSTALLATION