Filter
Top Products
set the access point to “Repeater mode”. Simply speaking, “Repeater mode”
function is the combination of “AP mode” and “PMP mode”.
Parameter Description
Parent MAC Address
You have to enter the MAC addresses of other access points that join the
bridging work.
Child MAC Address
You have to enter the MAC addresses of other access points that join the
bridging work.
Mode
802.11b mode: It allows to select the transmit rate up to 11Mbps
802.11g mode: It allows to select the transmit rate up to 54Mbps
Mixed mode: It provides best performance for 11g transmission when
you enable the AP mode selection to “Mixed mode”.
Broadcast SSID
It will respond to Broadcast SSID requests. If you enable this function,
every wireless station located within the coverage of this access point