Filter
Top Products
Back Panel
Access Point’s connection ports are located on the back panel. Below is the
description of each connection port.
1 Antenna Connector
This round connection is standard Reverse SMA connector where any
antennas with Reverse SMA connector can connect to the Access Point.
2 DC Adapter Port
Insert the power jack of the power adapter into this port.
3 LAN Port
The Access Point’s LAN port is where you connect to your LAN’s
network devices.
4 Reset
The Reset button allows you to do one of two things.
1) If problems occur with your Access Point, press the reset button
with a pencil tip (for less than 5 seconds) and the Access Point will
re-boot itself, keeping your original configurations.
2) If problems persist or you experience extreme problems or you
forgot your password, press the reset button for longer than 5
seconds and the Access Point will reset itself to the factory default