Filter
Top Products
12
Installing the ITI-5232E (DC21X4 Driver) on Windows NT:
Follow the procedure below to install the NT driver on your Intel or Alpha based system.
The choices you are given may vary slightly from these examples based on your
machine’s current network configuration and options. See your system administrator for
any additional information.
Note: Digital’s Alpha systems use a dynamic link library file (DLL) called a
hardware abstraction layer (HAL). This file can be found on your boot disk at the
location \os\hal.dll. This is a system file and is hidden. You must use the “show
system and hidden files” option under explorer to see this file.
Certain Alpha systems will hang after installing multi-port Ethernet cards unless
this file is updated to hal.dll dated on or after 26-MAY-1998.
If you experience this hang, shut down the machine, and remove the ITI-5232E
from your system. Contact Digital for an updated HAL, and installation
instructions.
1. From the Windows NT START Menu, select the Control Panel icon.
2. From the Control Panel menu select the Network icon.