Support User Manuals

Invacare SP Personal Computer User Manual

Open as PDF

of 72

SECTION 11—TRANSPORT READY PACKAGE (TRRO)

TDX™ SP 68 Part No 1143190

Securing the Occupant

Wheelchair-Anchored Belts

ƽ WARNING

The pelvic belt that is provided by Invacare has been tested for use in a motor vehi-

cle on this wheelchair ONLY. DO NOT replace the pelvic belt with a different style

pelvic belt.

NOTE:Forthisprocedure,refertoFIGURE 11.2onpage 69.

Thewheelchairhasbeenprovidedwithapelvicbeltwhichmeetstherequirementsof

ANSI/RESNAW/C19.

Thepelvicbelt,providedbyInvacare,hasbeendesignedtoaccommodateuseoneither

sideofthevehicle.Ifnecessary,followtheinstructionsbelowtoreversetheorientationof

thepelvicbelttoaccommodatethevehicle‐anchoredupper‐torsobelt.

1. Installthepelvicbeltpin(Detail“A”ofFIGURE 11.2)intothelargeendoftheslotin

thebeltmountingbracket(Detail“B”orDetail“C”).Rotatedownwardandforward

untilitsnapsintoplaceintothesmallendoftheslot.

NOTE:Notethepositionofthemaleendofthebeltwheninstallingthepelvicbeltontothebelt

mountingbrackets.Themaleendofthepelvicbelt(DetailʺAʺofFIGURE 11.2)hasapinwhich

isusedtosecurethevehicle‐anchoredupper‐torsobelt.

2. RepeatSTEP1fortheoppositebeltmountingbracket.

3. Installthevehicle‐anchoredupper‐torsobeltontothepinonthemaleendofthepelvic

belt.

previous next