Filter
Top Products
29
Unpairing Procedure
Method 1
1. Power OFF the serial adapter
2. Change the position of Dip Switch 4
3. Power ON the serial adapter.The LED will blink once, indicating successful unpairing.
4. Power OFF the serial adapter
5. Change dip switch 4 back to its original position
6. You can now pair the Bluetooth serial adapter with another device
There are three different methods that you can follow to unpair the Bluetooth serial adapter
Any time that you want to pair the Bluetooth serial device with a new Bluetooth adapter/
device, you must follow the unpairing procedure as indicated below.
Method 3
Use HyperTerminal configuration menu and select “Clear Pairing Information” option.
If interconnecting two IOGEAR Bluetooth serial adapters, this must be done on both adapters.
For details on using the HyperTerminal configuration menu, please see Appendix A on page 31
Method 2
If using two (2) IOGEAR Bluetooth serial adapters, follow the back-to-back pairing
procedure indicated on page 19; which will retain the latest pairing information