Filter
Top Products
16
17
10. Set up will install the software on your
Remote computer. Click “Finish”.
Note: You may be prompted to reboot the Local
computer after the software has been installed. It is
not necessary to do so.
11. Turn on the Local (laptop) computer.
12. Plug the shorter USB cable into a USB port on
the Local (console) computer.
13. On the Local screen, an AutoPlay window
appears. Click on “Run Launch_GCS661U.
exe”.This will install the software on the Local PC.
Note: After initial software is complete, you will
not need to go through the steps above again.
However, every time you use the KVM, you will
need to go to “My Computer” and click on “Run
Launch_GCS661U.exe” icon in the Local (laptop)
computer, if the Autoplay window does not appear
on your local screen.
14. When the software is installed on both PC’s,
the icon “Laptop KVM running” shows in the
lower left hand corner of the toolbar.