Filter
Top Products
20
The Main tab shows the HomePlug units that
are connected to the current computer and
other devices on the network. It will also tell
Mac Address of each device. It will refresh the
window, if you change devices, and also will
allow you to connect to different networks if
multiple units are connected to your computer.
The connection quality will show in the Quality
tab. You will have to do troubleshooting if see a
question mark at the Quality tab.
Note: If you do not see ANY unit in the device
status, and there is a device connected to your
computer, try to unplug all devices, and plug them
back in. Also make sure that the cable connecting
your computer to the HomePlug device is the right
type and working correctly. If all of this seems to be
correct, and you still receive nothing in the Device
window, try rebooting your computer. If the problem
still persists, please contact technical support
2.
Powerline Confi guration Utility