Filter
Top Products
21
The Main tab shows all the other HomePlug
units on your powerline network. It will
represent them by MAC Address, and will also
show the available bandwidth to each unit
(Units farther away from the current computer
might have a lower Data Rate, since the
distance is farther). If you add or subtract units
from your home network, you might want to
re-Scan, by clicking the “Scan” button. This
will rescan the network, and refresh with any
changes.
Note: Only units with the same Network Password
will be shown, please check that fi rst, to make
sure they all have the same network password
(Case sensitive).
3.
Powerline Confi guration Utility