Filter
Top Products
13
Operation
Operation
Controlling the computers on your MiniView
TM
II USB KVM (GCS124U) from a single console could not be easier. The switch
has three port selection methods providing you with instant access to your computers.
- Manual Port Selection
- HotKey Port Selection
- Daisy Chain Port Selection
Selecting the Active Port
Each CPU port is assigned a numeric ID (1-4). You can directly access any computer connected to the KVM with a hotkey combination that specifies the
ID of the CPU port.
Press and release each of the following keys, in order, until complete
• [control] Press the control key once
• [1, 2, 3, 4] Enter the number of the port you wish to switch to.
• [ENTER] Pressing enter completes the port selection process
Forward/Back mode
This feature allows you to switch between computers in order to monitor them manually. You can dwell on a particular post for as long or as little as you
like as opposed to Auto Scan Mode, which switches after a fixed interval. To invoke Last/Next Mode, press the following keys.
1. Press and release [F1] twice to move Back through the USB KVM Ports
2. Press and release [F4] twice to move FORWARD through the USB KVM Ports