Filter
Top Products
17
OSD Operation
Operation
F4 QV (quick view):
You can broaden or narrow the number of ports that get automatically scanned by selecting only the ones you want within this menu. To select/deselect a port
for Quick View:
1. Use the up and down arrow keys to move the highlight bar to the desired port.
2. Press F4
When a port has been selectedfor Quick View scanning an arrowhead displays in the FQ Column. When a port is deselected the arrowhead will disappear.
F5 EDIT:
Here you can name each of your ports allowing yo to easily identify each connected computer.
1. Use the navigation key to move the highlight bar to the port you want.
2. Press F5
3. Key in the new port name or modify/delete the old one.
The maximum number of characters allowed for a port name is 15 Legal Characters include
All alpha characters a-z; A-Z
All numeric charaters 0-9
Any of the following (-)(:)(.)(Space)
The OSD is not case sensitive so it will not matter if the OSD displays the port name in all capitals or other. When you finish editing, press [ENTER] to have
the change take effect. To abort the change Press ESC.