Filter
Top Products
20
Port Switching
[Scroll Lock] [Scroll Lock] [Enter]
[Scroll Lock] [Scroll Lock] [K] [Enter]
[Scroll Lock] [Scroll Lock] [U] [Enter]
[Scroll Lock] [Scroll Lock] [S] [Enter]
[Scroll Lock] [Scroll Lock] [n] [Enter]
[Scroll Lock] [Scroll Lock] [n] [K] [Enter]
[Scroll Lock] [Scroll Lock] [n] [U] [Enter]
[Scroll Lock] [Scroll Lock] [n] [S] [Enter]
[Scroll Lock] [Scroll Lock] [n] [K] [U] [Enter]
[Scroll Lock] [Scroll Lock] [n] [K] [S] [Enter]
[Scroll Lock] [Scroll Lock] [n] [U] [S] [Enter]
Brings the KVM, USB hub, and Audio focus from the current port to the next port on the KVM.
Brings only the KVM focus from the current port to the next port on the installation. The
USB hub and Audio focus remain where they are.
Brings only the USB hub focus from the current port to the next port. The KVM and audio
focus remain where they are.
Brings only the audio focus form the current port to the next port. The KVM and USB hub
focus remain where they are.
Brings the KVM, USB hub, and audio focus to the computer attached to the port
corresponding to the specified Port ID.
Brings only the KVM focus to the computer attached to the specified port. The USB hub
and audio focus remain where they are.
Brings only the USB hub focus to the computer attached to the specified port. The KVM
and audio focus remain where they are.
Brings only the audio focus to the computer attached to the specified port. The KVM and
USB hub focus remain where they are.
Brings the KVM and USB hub focus to the computer attached to the specified port. The
audio focus remains where it is.
Brings the KVM and audio focus to the computer attached to the specified port. The USB
hub focus remains where it is.
Brings the USB hub and audio focus to the computer attached to the specified port. The
KVM focus remains where it is.
HOTKEYS ACTIONS
Hotkey Operation
All port switching functions
begin by quickly tapping
the Scroll Lock key twice:
[Scroll Lock], [Scroll Lock],
followed by any of the
keys indicated on the table
below.
If using the
Scroll Lock
key is not feasible, you
can configure the KVM
to use the
Control
key
instead. Refer to Page
26 for more details and
MAC keyboard
instructions.
Note: The n stands for the computer’s Port ID number (1, 2, 3, or 4). Replace the n with the appropriate Port ID when entering hotkey combinations.