Filter
Top Products
27
Hotkey Operation
Keyboard Operating Platform
The GCS1742/GCS1744 default port configuration is for a PC Compatible keyboard operating platform.
If you have a Mac attached to a port, you can change a port’s keyboard operating platform configuration
as follows:
1. Bring the KVM focus to the desired port
2. Invoke Hotkey mode (see page 22-23)
3. Press and release the appropriate Function key (see table).
* The first time the Sun system runs from a port, you must configure its port for the Sun keyboard
operating platform
before
you turn on the system; otherwise, the Sun system will not start.