Filter
Top Products
Coaxial Networks, Inc. Page 12 of 60
Installation Requirements
To successfully install and configure the IRIS DC1100, you will need the following:
PC Workstation Requirement
Ethernet network Interface
TCP/IP network protocol installed
Terminal emulation or Telnet software for configuring IRIS via your PC’s serial port or
network before placing it into service on a network. HyperTerminal is such software included
in Windows operating system.
Network Service Provider Requirements
Your Network Service provider should provide the following:
An uplink connection to the Internet provided by a NSP
The NSP equipment must have output of 10/100 Ethernet port.
One Static IP Address
Gateway Address
Subnet mask
DNS address
Package Contents
Your package should contain the items listed below. If you determine anything to be damaged or
missing, please contact the seller from whom the equipment was purchased.
• One IRIS DC1100
• One IRIS DC1100 Documentation
• One AC power supply cord
• Mounting Brackets with screws
• One RS232 cross-over cable
• One Ethernet Cable