Filter
Top Products
Page 8
Installation
TM-1400 Series Progressive Scan Shutter Cameras
2.2.2 (d) Camera Link Connector
The TM-1400CL has a 26-pin MDR26 connector (3M part number 10226-6212VC) on the rear panel to
output Camera Link data. The connector pin-out is shown in Table 4 below.
Note: SerTC: Differential Serial Communication to camera;
SerToFG: Differential Serial Communication to frame grabber.
2.2.2 (e) Analog Output Connector
The TM-1400 has a BNC connector on the rear panel
to output analog video.
TABLE 4. Connector Pinout Configurations (10226-6212 VC)
Camera Link Connector MDR 26-pin Connector 10226-6212VC
Pin # Description I/O Pin # Description I/O
1 GND 14 GND (Shield)
2 Tx OUT 0- Out 15 Tx OUT 0+ Out
3 Tx OUT 1- Out 16 Tx OUT 1+ Out
4 Tx OUT 2- Out 17 Tx OUT 2+ Out
5 Tx CLK OUT- Out 18 Tx CLK OUT+ Out
6 Tx OUT 3- Out 19 Tx OUT 3+ Out
7 SerTC+ In 20 SerTC- In
8 SerTFG- Out 21 SerTFG+ Out
9 VINIT- (CC1-) In 22 VINIT+ (CC1+) In
10 INTEG+ (CC2+) In 23 INTEG- (CC2-) In
11 EX_HD- In 24 EX_HD+ In
12 EX_HD+ In 25 EX_HD- In
13 GND 26 GND
1
1426
13